Resume of Prof. Saied Darwish
Industrial Engineering Department
King Saud University
Name: Saied Mohamed Hassan Darwish
http://faculty.ksu.edu.sa/Darwish/default.aspx
Academic rank:
Professor,
Industrial Engineering Department, King Saud University,
P.O. Box 800, 11421,
Riyadh, Saudi Arabia.
Tel: +966 (01) 4676655 / 002(02) 4802679
Fax: +966 (01) 4678657
E-mail: darwish@ ksu.edu.sa
King Saud University: Is among the best 500 hundreds
Universities worldwide.
Industrial Engineering Department of KSU: Is ABET fully accredited
Since 2009, until 2015.
DEGREES & EXPERIENCE
• Ph.D., Birmingham University, U.K., 1987. Thesis title: "Adhesive bonding of metal cutting tools".
• M.S., Egypt, Assiut University, 1978. Thesis title: "Visco-plastic behavior of metals under torsional impact and axial thrust".
• B.S., Egypt, Alexandria University, Alexandria, Egypt, 1975.
• 25 years of experience in the field of manufacturing engineering.
INDUSTRIAL EXPERIENCE
• The Aluminium Company of Egypt (1988-1991):The aluminium company of Egypt is one of the leading companies in the middle east for aluminium smelting. For the purpose of developing its production line by transfering the production technology from the soderberg to the pre-backed technology,
• I was nominated with two other professors as members for the company higher committe for R&D to initite an R&D unit for the company and the mission was to prepare a group of freshly graduated engineers for the research and development purposes for the company.
• I have also participted in a project to build and design a 30 tons holding furnace for the company which has been built and exported to Jordan.
• Marwin Cutting Tools, Limited, Leicester, U.K. (1983-1986):Marwin cutting tools, UK is one of the world leaders in metal cutting tool manufacturing. The policy of the company is to introduce new products regularly. I was supported by Mrwin company for the development of bonded metal cutting tools for the first time.
• The work resulted in European Patent No. 0058152 (dated 29.08.84) with Marwin Cutting Tools,
• Saudi Land Force (2008- present): Building a data base for all spare parts avilable with all technical specification, saftey regulations and manfactring enterprises for future production.
• The project resulted in implementing the reverse engineering tools for the production of some critcal spare parts. The spare parts are now approved internationally and exported by the land force to other countries.
• Saudi Air Force (2007- present): Implementing the reverse engineering technique for the production of some sophisticated elctrical and mechanical parts. These parts are now tested and approved.
• This encourage the air force to establish a center for local manufacturing of spare parts.
•Center of Manufacturing Technology Transfer, KSU, Saudi Arabia (2009- presnt): King Saud University is the largest instiute of higher education in the Kingdom of Saudi Arabia and is ranked 197 in webmatrix 247 in the Qtimes and among the first 500 in Shengahy worldwide. In order to preserve its ranking KSU established a 17 development programs. Of the most imortant programs is the Center of Manufacturing Technology Transfer. The main purpose of the center is to make practical environment avilable for its students.
• The center have been engaged in some stratgic product such as automotive development, design and manufacturing of industrial assembly line and the design and manufacturing of small lighweight aeroplanes.
• Project Manger First Arbian SUV Car Saudi Arabia (2009- presnt):: Based on the development program, KSU was to create a vehicle with characteristics suitable for the Arabian Gulf region.
• I have been appointed as the project manger. The project resulted in a Styling model at Geneva motor show March 2010 and a full running prottype will be presented at KSU in Riyadh May 2010. Below are some sites about my project in Geneva 2010.
http://www.salon-auto.ch/en/en-images/king-saud-university-gazal-1-0-20618
http://www.trucktrend.com/autoshows/coverage/163_news100303_king_saud_university_gazal_1_at_geneva_2010/index.html
index.html
http://www.autoblog.com/2010/03/03/geneva-2010-king-saud-university-gazal-1-is-one-whopper-of-a-st/
http://wot.motortrend.com/6616204/auto-shows/2010-geneva-king-saud-university-gazal-1-comes-from-royal-bloodlines/index.html
http://wot.motortrend.com/6616204/auto-shows/2010-geneva-king-saud-university-gazal-1-comes-from-royal-bloodlines/photo_3.html
http://hvtm.posterous.com/gazal-1-from-saudi-arabia
http://www.evoxforums.com/forums/showthread.php?s=95f8de2d44da87f7307d581f9537da2b&p=380795#post380795
U S A Patents
• International patent No PCT/IB2008/002812) WIPO (Disposable Dental Hand piece).
• International patent No PCT/IB2010/12650624) WIPO (Tooth Extraction Tool).
• Patent application: Interactive Ultrasonography-based dental assistant for cavity restoration (under filling process).
• Patent application: KSU first SUV car GAZAL1 (under filling process).
Consultancy Work
• Consultant for the Aluminum Company of Egypt (x- Minster of Industry Eng. Soliman Reda Ali), 1988-1991.
• Consultant for Saudi Arabian Standards Organization (SASO) 1993-now.
• Chairman of the Technical Committee on specifications of Furniture, Saudi Arabian Standards Organization.
• Consultance work for the air forces through King Abdullah Institute.
• Consultance work for the land forces through King Abdullah Institute.
SUBJECTS OR COURSES TAUGHT DURING THE MOST RECENT ACADEMIC YEAR
Post graduate Supervision:
• Co-supervising a Ph D Thesis with Prof R. D.
• Adams, UK.
• Supervised 4 M. Sc. thesis in KSU.
• Supervised 2 M. Sc. thesis in Egypt.
• Supervised 1 M. Sc. thesis in Kuwait University.
Scientific Research Fields
Funded Research
a- King AbdoulAziz City for Science and Technology funded projects.
• Design and manufacturing of custom-made prostheses
with clinical application to Saudi patients. King AbdulAziz City for Science and Technology, Three years Grant No AT 28-2, (209-2012).
• Advanced Manufacturing Technologies in Saudi Engineering Industries – Actuality and Aspirations. King AbdulAziz City for Science and Technology, Three years Grant No AT 22-36, (2003-2006).
• A Grant for CAD/CAM of artificial knee joint King AbdulAziz City for Science and Technology (2007-2008).
b- National Funded Research Projects:
• Evaluation of CIM technologies in Saudi Industries. Deanship of Scientific Research, King Saud University, Grant No :AR-30 (2003-2005).
c- Saudi Basic Industries Company (SABIC) funded Research:
•Manufacturing of bonded heat exchangers, using SABIC structural steel , Saudi Arabian Basic Industries Company SABIC,, Eighteen month Grant /429 (2008-2009).
• Manufacturing of Bonded Structures Using SABIC Structural Steel , Saudi Arabian Basic Industries Company SABIC,, Eighteen month Grant /429 (20087-2009).
• Resistance welding of SABIC steel sheets, , Saudi Arabian Basic Industries Company SABIC,, Eighteen month Grant 58 /428 (2007-2008
• Optimization of machining conditions for SABIC structural steel, Saudi Arabian Basic Industries Company, Eighteen month Grant (2003-2004).
• Modeling of Riveted and Riveted-bonded Joints for SABIC steel constructions, SABIC Company, Eighteen months Grant. Grant No. 30/ 425 (2004-2005).
• Modeling of shrink fitted joints of SABIC structural steel, Saudi Arabian Basic Industries Company, Eighteen month Grant 14/426 (2006-2007).
• Case hardening of SABIC polymer tubes through vertical wateriest, Eighteen month Grant (2005-2006).
d- College of Engineering Research Center funded research
• Machining of hard materials with bonded tools, Research Center, College of Engineering, King Saud University, Grant No 26/424.
• Modeling and design of adhesive bonded milling cutters, Research Center, College of Engineering, King Saud University, Grant No 12/422.
• A Book on " Manufacturing Automation using PLCs", Research Center, College of Engineering, King Saud University, Grant No 16/424, ( 2003-2004).
• Optimization of hip joint replacement, Research Center, College of Engineering, King Saud University, Grant No 51/426, 2005-2006).
• A Book on " Manufacturing engineering processes selection", Research Center, College of Engineering, King Saud University, Grant No 50/426, ( 2005-2006).
• Effect of heat treatment on fatigue and toughness properties of steel" Research Center, College of Engineering, King Saud University, Grant No 2/426,
( 2005-2006).
• Optimization of machining conditions of fatigue enhanced steels. Research Center, College of Engineering, King Saud University, Grant No 69 /427,
( 2006-2007).
• The Selection of Manufacturing Engineering Processes (Machining processes) . Research Center, College of Engineering, King Saud University, Grant No51/428, ( 2006-2007).
• Manufacturing artificial hip joint locally, Research Center, College of Engineering, King Saud University, Grant No- 431/, ( 2007-2008).
• The effect of micro channel orientation in SABIC polymers injection molding on the complete filling of the micro channel in respect to the melt flow. Research Center, College of Engineering, King Saud University, Grant No-431 /35, ( 2010-2011).
Writing in international books:
• Writing a chapter in Hybrid Adhesive Joints Published by Sringer, 2010.
• Invited by Prof Chao –Ting Chi, to write a chapter on “Resistance welding of dissimilar joints (Joints of different materials& thickness” in the international book: Materials characterization in weld for modern welding technology”.
Writing local books:
• A Book on “Manufacturing engineering processes selection (metal cutting processes)", for the Research center of KSU.
• A Book on “Manufacturing engineering processes selection (metal forming processes)", shared with Dr A Al-Samhan, for the Research center of KSU.
• A Book on “Manufacturing Automation using PLCs", shared with Dr A Al-Samhan, for the Research center of KSU.
Refereeing for international journals and conferences.:
• Refereeing for the International Journal of European Polymer
• Refereeing for the International Journal of Materials Processing Technology.
• Refereeing for the International Journal of Adhesion & Adhesives.
• Organizing and chairing a special session on “Design, Analysis and Simulation in Bio-engineering Environment” for the METU 2006, Turkey.
• Refereeing for King Abdullah University “Researchers nominating committee., 2008
• Member of the International Committee of UMTIK conference, 2004,2006,2008
Refereeing for National journals and conferences.
• Member of the scientific committee, 7th Saudi Engineering Conference, 2007, Saudi Arabia.
• Coordinator of the registration Committee, 2nd Industrial Engineering Conference, IIEC2004, Saudi Arabia.
• Coordinator of the scientific sub-committee on manufacturing systems, 2nd Industrial Engineering Conference, IIEC2004, Saudi Arabia.
• Area Editor - Second Industrial Engineering Conference, Saudi Arabia, 2004.
Participation and attendance in International conferences:
• AMPT09, Kuala Lumpur, Malaysia, 2009.
• ACE-X 2009 , 3nd International conference on Advanced Computational Engineering, 2009, Rome-Italy.
• ICCE/17 7th International conference on Composites or NANO Engineering, Honolulu, Hawaii, USA, 2009
• ACE-X 2008 , 2nd International conference on Advanced Computational Engineering, 2008, Barcelona- Spain.
• UMTIK,2006, 6th International conference on Machine Design, Turkey. 2006.
• UMTIK,2004, 4th International conference on Machine Design, Turkey. 2004.
• International conference on Materials Processing Technology, Edinburgh, UK, 2004.
Participation in Research Chairs
• Member of the Technical Committee, of Princess Fatimah Alnajras’s, Research Chairs for Advanced Manufacturing Technology, in the Industrial Engineering Department.
• Member of the Advisory Committee, Center of excellence in materials Engineering, College of engineering, King Saud University.
Honors and awards
• Best management for the First Saudi SUV car 2010, Geneva Auto show 2010..
• Research Associate ship from the SERC, U.K 1983- 1987.
• Research Fellowship from Kuwait University, Kuwait, 1988
• Research Grant from The Aluminum Company of Egypt on modeling holding furnaces, Egypt, 1989.
• Research Grant from The Aluminum Company of Egypt on modeling aluminum reduction cells, Egypt, 1990.
UNIVERSITY AND SOCIETY SERVICES
University activities
• Cooperative Member of the NANAO program, office of vice dean for knowledge exchange.
• Manager of the first Saudi Car project program.
• Member of the Attraction of researchers and Staff program office of vice dean for knowledge exchange.
• Member of the Innovation and intellectual program, office of vice dean for knowledge exchange.
College of Engineering Activities
• Coordinator of the academic committee of the faculty of engineering.
• Member of post graduate studies committee of the faculty of engineering.
• Member of the ABET academic committee of the faculty of engineering.
IE Departmental Activities
• Coordinator of the Scientific groups (system engineering & Manufacturing systems), I.E. Department.
• Coordinator of the Lab Committee, I.E. Department.
• Coordinator of the ABET accreditation committee, I.E. Department.
• Coordinator of the ABET accreditation committee, College committee.
• Coordinator of the Academic Committee.
• Member of the student registration Committee.
Faculty Development Programs during last five years
• Participated in the development of the study plan (132 hours) , of the IE department and the engineering college of King Saud University, Riyadh, Saudi Arabia
• ABET accreditation activities in IE department and the College.
• Participated in the development of the study program of the IE department of King Saud University, Riyadh, Saudi Arabia
• Participated in the development of the program of the Technical College in Riyadh, Saudi Arabia.
Seminars and workshops and short courses
• A Seminar on CAD/CAM design and manufacturing of aluminum holding furnaces. ”, King Saud University
• A seminar on “Hip joint replacement”, King Saud University..
• A Seminar on “Measuring low thermal conductivities” ”, King Saud University.
• .A Seminar on Design and manufacturing of bonded tools” ”, King Saud University.
• A group of seminars on ABET accreditation, IE department.
• A group of short courses on "Maintenance management for the Saudi electric company", Saudi Arabia.
• A group of short courses on "Maintenance management for the ministry of health", Saudi Arabia.
• A group of short courses on "Maintenance management for Saudi Telecom", Saudi Arabia.
• A seminar on Controlling the densification behavior of NANO microstructures to meet different applications
Titles of M. Sc. Supervised
• A Master thesis on "The design of a bonded gear box", Kuwait University, Kuwait.
• A Master thesis on "CAD/CAM of fits and tolerance selection", Assiut University, Egypt.
• A Master thesis on," Knowledge base for metal welding processes", King Saud University, Saudi Arabia.
• A Master thesis on," Spot welding and weld-bonding of dissimilar materials", King Saud University, Saudi Arabia.
• A Master thesis on," Knowledge base for metal welding processes", King Saud University, Saudi Arabia.
• A Master thesis on," Weld ability models for identifying spot welding zones", King Saud University, Saudi Arabia.
• A Master thesis on," 3D modeling of Spot welding and weld-bonding of dissimilar materials", King Saud University, Saudi Arabia (underway- co-supervision with Dr. E. Bahkli).
List of Publications
1. S M Darwish, A. Al-Ghamdi, A M Gemeal “Finite Element Safety Checking of a Newly Designed Passenger Car Doors”, ICCE 17, 2010, Alaska, USA, 2010.
2. S. M. Darwish, Al-Samhan,” Strength of double containment joints having Right Angle Supports “ Accepted for publication, Int J. Of Adhesion 2010.
3. S. M. Darwish, Al-Samhan,” Adhesively bonded composite structures having different configuration”,ICCE 17, 2009, Hawi, USA, 2009.
4. S. M. Darwish, Al-Samhan, ”Recommended Choice of adhesively bonded artfacial knee joint replacement”, ACE-X2009, 3rd International conference on Advanced Computational Engineering, 2009, Rome-Italy.
5. S. M. Darwish, Al-Samhan, H. Helmy, “Statistical wear models for adhesively bonded tools”, AMPT09, Kuala Lumpur, Malaysia, 2009.
6. S. M. Darwish, Al-Samhan’ Optimization of Artificial hip joint Parameters”, J. of Materials Science and Engineering Technology, 2009.
7. S. M. Darwish, “Adhesive bonding in medical applications), ACE-X2008, 2nd International conference on Advanced Computational Engineering, 2008, Spain.
8. S. M. Darwish, Al-Samhan “ Parametric study on cemented hip joint), ACE-X2008, 2nd International conference on Advanced Computational Engineering, 2008, Spain.
9. S. M. Darwish, Al-Samhan, "The effect of cement stiffness and tibia tray material on the life span of artificial knee", Int. J. Of Adhesion & Adhesives, vol. 28, pp 120-125, 2008.
10. S. M. Darwish, M A E Saleh,” Controlling the densification behavior of NANO microstructures to meet different applications”, Knowledge based industries & Nano technology conference, Qatar, 2008.
11. S. M. Darwish, Al-Samhan, “Rationale choice of polyethylene layer thickness in artificial knee replacement”, Proceedings of the Institution of Mechanical Engineering, Part L, Journal of Machine Design and Applications (In press)
12. S. M. Darwish, Al-Samhan, "The signature of cement stiffness and tibia tray material on the life span of artificial knee", UMTIK Conference, Turkey, vol.2, pp 681-690, 2006.
13. Al-Samhan, S. M. Darwish, H. Al-Khawashki, M.M. Zamzam, "Optimization of polyethylene layer thickness of artificial knee", UMTIK Conference, Turkey, vol.2, pp 703-712, 2006.
14. Al-Samhan, S. M. Darwish, "Factors influencing thermo-mechanical stresses developed in bonded tools", Int. J. Of Adhesion & Adhesives, vol. 25,pp 379- 388, 2005.
15. E. Al-Bahkli, A. Al-Samhan, S.M. Darwish, "Thermal stresses of riveted and riveted-bonded joints", 6th Int. Congress on Thermal Stresses, Vienna University of Technology, Austria, pp 353-356, 2005.
16. A. Al-Ahmari, S. M. Darwish," Optimization of machining conditions for SABIC structural steel", UMTIK Conference, Antalya,Turkey, 2004.
17. S.M. Darwish "Analysis of weld-bonded dissimilar materials", Int. J. Of Adhesion & Adhesives, vol. 24, pp 347-354, 2004.
18. S.M. Darwish and A. Al-Samhan, "Thermal stresses developed in weld-bonded joints", J. of Materials Processing Technology, vol. 153-154, pp 971-977, 2004.
19. S.M. Darwish "Characteristics of weld-bonded commercial aluminum sheets", Int. J. Of Adhesion & Adhesives, vol. 23,pp 169-176, 2003.
20. S.M. Darwish, "Weldbonding strengthens and balances the stresses in spot-welded dissimilar thickness joints", J. of Materials Processing Technology, vol. 134, pp 352-362, 2003.
21. S.M. Darwish and A. Al-Samhan, "Thermal stresses developed in weld-bonded joints", Proceedings of Advances in Materials and Processing Technologies Conf., U.K., pp 994-998., 2003.
22. A. Al-Samhan and S.M. Darwish," Finite element modeling of weld-bonded joints" J. of Materials Processing Technology, vol. 142, pp 587-598, 2003.
23. S.M. Darwish and A. Al-Samhan Peel and shear strength of spot welded and weld-bonded dissimilar thickness joints J. of Materials Processing Technology, vol. 147, pp 52-59, 2004.
24. S.M. Darwish and A. Al-Samhan" Design rationale of weld-bonded joints" Int. J. Of Adhesion & Adhesives, U. K., 2003.
25. S.M. Darwish and A. Al-Samhan," Strength prediction of weld-bonded joints", Int. J. Of Adhesion & Adhesives, Vol. 23,pp 23-28, 2003.
26. S.M. Darwish, “Effect of tool bit insert-holder assembly on the quality of machined work pieces” J. of Materials Processing Technology, vol. 105, pp 233-236, 2000.
27. S.M. Darwish, S. AL Habdan and A. AL Tamimi,” A Knowledge-base for electronics soldering” J. of Materials Processing Technology, Vol. 97, pp1-9, 2000.
28. S.M. Darwish, A. Ghanya “Critical assessment of weld-bonded technologies” J. of Materials Processing Technology, Vol. 105, pp221-229, 2000.
29. S.M. Darwish,” Machining of difficult-to-cut materials with bonded tools”, Int. J. Of Adhesion & Adhesives, vol.20,pp 279-289, 2000.
30. S.M. Darwish and A. Ghanya,” Development of spot-welded low carbon steel damping sheets” Int. MDP Conference, vol.1 ,pp 477-488, Egypt, 2000.
31. S.M. Darwish,” The effect of tool material and cutting parameters on the machinability of the super- met 718 nickel-super alloy, Alexandria Engineering Journal, 2000.
32. S.M. Darwish , S.D. Al-Dekhial, ”Statistical models for spot welding of commercial aluminium sheets”, Int. J. of Machine Tools & Manufacture, Vol.39, pp 1589-1610, 1999.
33. S.M. Darwish, S.D. Al-Dekhial “Micro-hardness of spot welded (B.S. 1050) commercial aluminium as correlated with welding variables and strength attributes” J. of Materials Processing Technology, Vol. 91, pp 43-51, 1999.
34. S.M. Darwish, M.S. Soliman, and A. M. Al Fahead ,” Manufacturing and characteristics of brass damping sheets” J. of Materials Processing Technology, Vol. 70, pp 66-71, 1998.
35. S.M. Darwish , S.D. Al-Dekhial” The response surface approach to spot welding commercial aluminum sheets” Int. J of Materials and Manufacturing processes, vol. 12, pp 189-202, 1998.
36. S.M. Darwish, A. AL Tamimi and S. AL-Habdan,” A Knowledge base for metal welding process selection” Int. J. Mach. Tools Manufact. Vol.37, No.7,pp 1007-1023,1997.
37. S.M. Darwish, M.S. Soliman, and A. M. Al Fahead ,” Characteristics and variables of spot welding and weld-bonding Bi-materials” J. of Materials and manufacturing processes, Vol.12, No.2, pp175- 186,1997.
38. S.M. Darwish,” Automated general tolerances for dimensions and features without tolerance indications” J. of Materials Processing Technology, Vol. 68, pp251-256, 1997.
39. S.M. Darwish, S. AL Habdan and A. AL Tamimi, ”A knowledge base for soldering” PEDAC Conference, Egypt, pp 497-510, 1997.
40. S.M. Darwish, “Correlation between spot weld quality and vibration behavior”, Int. J. of Materials and Product Technology, vol.12, no.1, pp59-67, 1997.
41. S.M. Darwish, A. M.AL Tamimi,” The selection of the casting process using an expert system” Computers in Industry, vol.30, pp77-86, 1996.
42. S.M. Darwish, “Effect of tool bit insert-holder assembly on dimensional accuracy and geometrical tolerances of machined workpieces” Int. J. Mach. Tools Manufact. Vol.35,No.6, pp 841-849, 1995.
43. S.M. Darwish, A. Niazi , and A. Ghanya,” Phase stability of duralumin machined with bonded and brazed carbide tools”, Int. J. of Machine Tools & Manufacture, vol.32, No. 4, pp 35-38, 1992.
44. S.M. Darwish,” Prediction of thermo-mechanical stresses developed in aluminium holding furnaces”, Int. PEDAC92 Conference, pp. 555-568, Egypt, 1992.
45. S.M. Darwish,” Practical loading conditions of bonded joints” ”, Int. PEDAC92 Conference, pp., 293-306, Egypt, 1992.
46. S.M. Darwish, M.E. Eltaib, M.M. Sallam” Computer aided allocation of fits & tolerances”, Int. PEDAC92 Conference, pp., 801-812, Egypt, 1992.
47. R. Davies and S.M. Darwish,” Temperature distribution of bonded tools having atomized copper powder mixed with adhesive” ”, Int. J. of Machine Tools & Manufacture, vol.31, No4, pp 617-623, 1991.
48. S.M. Darwish, A. Niazi, A. Ghanya and M. E. Kassem, “Improving the electrical properties of structural epoxy resin adhesives”, Int. J. Adhesion & Adhesives, vol. 11, No.1, 1991.
49. S.M. Darwish, R. Al-Abbas and M.M.Sadek,” Design rationale of industrial bonded, double containment bonded joints”, Int. J. Adhesion & Adhesives, vol. 11, No.2, 1991.
50. S.M. Darwish, “The finite element approach to model holding furnaces”, Int. J. Of Metals, vol.43, pp. 36-38, 1991.
51. S.M. Darwish, K.M. Azayem and M.M.Sadek, “Design philosophy of a bonded gear box”, Int. J. of Machine Tools & Manufacture, vol.31, No4, pp 635-631, 1991.
52. M.E. Eltaib, S.M. Darwish, M.M. Sallam,” Computer aided design and manufacture of limit gauges”, 3rd Int. Conference of Ain Shams University on PEDD, pp39-51, 1990.
53. S. M. Darwish, A. Abed El-Mageed, M.R. Bayoumi, “Computer aided design of aluminium holding furnaces”, ”, 3rd Int. Conference of Ain Shams University on PEDD, pp.53-62,1990.
54. R. Kilik, R. Davies and S. M. Darwish,” Thermal conductivity of adhesive filled with metal powders”, Int. J. Adhesion & Adhesives, vol.9, No.4, pp., 219-223, 1989.
55. S.M. Darwish, K.M. Azayem and M. M. Sadek, “A novel design approach for industrial bonded joints”, 4th Int. Conference on CAPE, Edinburgh, pp.45-49, 1989.
56. S. Darwish , R. Davies,” Adhesive bonding of metal cutting tools” Int. J. of Machine Tools & Manufacture, vol.29, No.1, pp 141-152, 1989.
57. S. Darwish , R. Davies, ”Investigation of the heat flow through bonded and brazed metal cutting tools”, Int. J. of Machine Tools & Manufacture, vol.29, No.2, pp 229-237, 1989.
58. R. Al-Yassin, S.M. Darwish, M.M.Sadek,” Computerized work part code system for implementation in flexible manufacturing systems, ASME Conf On Computers in industry, pp. 159-164, 1988.