Publications of Civil Engineering Department during 2007
Structural Engineering Group
A.A. Charif, "Analysis model for biaxially loaded reinforced concrete columns", ACI Int. Conf. on advances on cement based materials and applications in infrastructure, Lahore, December 12-14, 2007
A.A. Charif, "Development of software for analysis and design of RC sections subjected to biaxial bending and axial force according to the Saudi building code SBC", 7th Saudi Engineering Conference, KSU, Riyadh 26-30 Nov.2007.
A.A. Charif, "Nonlinear static responses of RC frames designed on the basis of seismic provisions", 7th Saudi Engineering Conference, KSU, Riyadh 26-30 Nov.2007.
A.A. Charif,, "Design method of flexible continuous footing on swelling clay soils", Jnl of Eng. And Appl. Sci. Vol.2 No 3, 2007, pp. 531-539
A.A. Charif,, , Bin Ziyyad, Tareq, Flexural response of ferrocement with fibrous cementitious matrices, Construction and Building Materials, 21, 2007, pp. 1198-1205.
A. Alhozaimy, “Effect of Retempering on the Compressive Strength of Ready-Mixed Concrete in Hot-Dry Environments" Journal of Cement and Concrete Composites, Vol 9, 2007, pp.124-127.
A. Alhozaimy, Al-Negheimish A, “Strength Development of Concrete Made of Type I and Type V Cements Produced in Saudi Arabia,” Proceedings of the 7th Saudi Engineering Conference (SEC7), King Saud University, Riyadh, 2007.
A. Alhozaimy, Al-Negheimish A, Al-Sulaiman S., Al-Swaida S. and Al-Qahtani, M., “Quality Scheme for RMC as an Important Element for the Successful Implementation of the Saudi Building Code for Concrete Structures,” Proceedings of the 7th Saudi Engineering Conference (SEC7), King Saud University, Riyadh, 2007.
A. S. Malaikah, and Alhozaimy, A., “Development of a Code Expression for the Modulus of Elasticity of High Strength Concrete Using Local Materials,” Final Research Report No. 37/425, Research Center, College of Engineering, King Saud University, Riyadh, Saudi Arabia, September 2007.
A.I. Al-Negheimish and Alhozaimy, A. M., “Assessment of Compressive Strength Testing by Commercial Testing Laboratories in Riyadh,” Final Report, Project No. DSR-AR-423/22, Deanship of Scientific Research, King Saud University Press, 2007.
S.H. Alsayed" Effect of the Schemes of Fiber Reinforced Polymeric Laminates on the out-of Plane Behavior of Unreinforced Masonry Walls", Accepted to be Presented at the 12th International Colloquium on Structural and Geotechnical, Cairo, Egypt, December 10-12, 2007.
K. Al-Saif, A., ElMadany, M. M., Malaikah, A. S., “Field Study for the Evaluation of Steel Bridges in Riyadh City,” Applied National Reserch Report Project No. DSR-AR-39, Deanship of Scientific Research, King Saud University, Riyadh, Saudi Arabia, May 2007.
M. Al-Haddad, Shaat, N, Al-Assaf, M. "Seismic Microzonation of City of Haql and Ad-Dura Custom", Final Report Report, King Abdulaziz City for Science and Technology, (KACST Grant No. AR-19-46), 2007, Riyadh
M.I. Khan, "Application of Artificial Neural Networks for Pore Structure of High Strength Concrete", Ninth International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, September 2007.
M.I. Khan, "A novel method for measuring porosity of high strength concrete", 7th Saudi Engineering Conference (SEC7), Riyadh, December, 2007.
M.I. Khan, "Application of Artificial Neural Network for the Prediction of strength and permeability of High Performance Concrete"' 7th Saudi Engineering Conference (SEC7), Riyadh, December, 2007.
M.I. Khan, "Properties of Composite Cementitious Systems and its Prediction using Artificial Neural Networks", Structural Engineers World Congress SEWC 2007, November , 2007.
M.I. Khan, “Prediction of Thermal Behaviour of Concrete Elements", Journal of Building and Environment, UK. Under review
M. I. Khan, A. M. Alhozaimy A. M. Al-Saleem, "Performance of Concrete Utilizing the Natural Pozzolan Available in the Kingdom of Saudi Arabia", 7th Saudi Engineering Conference (SEC7), Riyadh. Paper to be presented on 26-28 November 2007.
R.H. Haddad, Shannag, M. J., Hamad, R. J., Repair of heat-damaged reinforced concrete T-beams using FRC jackets, published in Magazine of Concrete Research, 59, No. 3, 2007, pp. 223-231.
R.H. Haddad, Shannag, M. Jamal, Moh’d, A., Repair of heat-damaged RC shallow beams using advanced composites, Published in Materials and Structures Journal, RILEM 2007, available on line.
S.H. Alsayed, N.A. Siddiqui, "Seismic Response of FRP Strengthened Corner Beam- Column RC Joints," Paper prepared for Journal of Composites for Construction, ASCE, Nov.2007.
S.H. Alsayed, Y.A. Al-Salloum, A.B. Shuraim & A.I. Al-Negheimish, “Evolution Of The Saudi Building Code For Concrete Structures (SBC 304), “The Seventh Saudi Engineering Conference, Riyadh, Dec. 2007.
S.H. Alsayed, Y.A. Al-Salloum, T.H. Almusallam and N.A. Siddiqui, “Seismic Rehabilitation of RC Beam-Column Corner Joints Using CFRP Sheets,” The 5th International Conference on Advanced Composite Materials in Bridges and Structures, (ACMBS-V) 22-24 September 2008, Manitoba, Canada.
S.H. Alsayed, Y.A. Al-Salloum, T.H. Almusallam and N.A. Siddiqui, “Seismic Strengthening Of Exterior Beam-Column Joints Using CFRP Sheets, “Structural Faults + Repair-2008 Edinburgh, Scotland, 10th - 12th June 2008.
S.H. Alsayed, Y.A. Al-Salloum, T.H. Almusallam, " Shear Strengthening of Exterior Beam-Column Joints Using FRP Sheets," Proceeding of the First International Workshop on Performance, Protection, Strengthening of Structures Under Exterme Loading (PROTECT2007), 20-22 August 2007, Whistler, Canada.
Shehab M. Mourad, "Proposed Technique for Identifying Damage Location Using Change in Mode Shape Parameters", Scientific Bulletin of Faculty of Engineering, Ain Shams University, September 2007.
Shehab Mourad, Hisham Al-Arabaty, Ahmed Korashy, and Mohamed Abdel-Fattah, "Dynamic Response of Bridges with unconnected Spans Using an Interactive Bridge-Vehicile Dynamic Analysis Approach", Civil Engineering Research Magazine, Faculty of Engineering, Al-Azhar University, Vol. 29 , No, 2, April 2007.
T.H. Almusallam, M.I. Khan Y.S. Al-Sugayer, W.A. Almasy and F.M. Trabzuni, "Utilization of Ti By Product as a Composite Cementing Materials", 7th Saudi Engineering Conference (SEC7), Riyadh. Paper to be presented on 26-28 November 2007.
T.H. Almusallam, Y,A, Al-Salloum, "Behavior of FRP Strengthened Infill Walls Under In-Plane Seismic Loading", Accepted for publication in the ASCE Journal of Composites for Construction, 2007.
T.H. Almusallam, Y,A, Al-Salloum, "Seismic Response of Interior RC Beam-Column Joints Upgraded – Part II: Analysis and Parametric Study", Accepted for publication in the ASCE Journal of Composites for Construction, 2007.
T.H. Almusallam, Y.A. Al-Salloum, ”Behavior of FRP Strengthened Infill Walls Under In-Plane Seismic Loading”, ASCE Journal of Composites for Construction, Volume 11, Issue 3, pp. 308-318, 2007.
T.H. Almusallam, Y.A. Al-Salloum, ”Seismic Response of Interior RC Beam-Column Joints Upgraded with FRP Sheets - Part II: Analysis and Parametric Study,” ASCE Journal of Composites for Construction, Volume 11, Issue 6, November/December 2007,pp. 590-600..
T.H. Almusallam, Y.A. Al-Salloum, S.H. Alsayed, N.H. Siddiqui, "Seismic Response of Infill Walls Strengthened with FRP Sheets," Proceedings of The 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), 16-18 July 2007, Patras, Greece.
T.H. Almusallam, Y.A. Al-Salloum, S.H. Alsayed, N.H. Siddiqui, "Seismic response of infill walls strengthened with FRP sheets," Proceedings of The 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), 16-18 July 2007, Patras, Greece.
T.H. Almusallam, Y.A. Al-Salloum, S.H. Alsayed, N.H. Siddiqui, "Seismic Response of Infill Walls Strengthened with FRP Sheets", Proceedings of the 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), 16-18 July 2007, Patras, Greece.
Y.A. Al-Salloum and T.H. Almusallam, "Creep Effect on the Behavior of Concrete Beams Reinforced with GFRP Bars Subjected to Different Environments", Construction and Building Materials, Volume 21, Issue 7, July 2007, Pages 1510-1519.
Y.A. Al-Salloum and T.H. Almusallam, "Seismic Response of Interior RC Beam-Column Joints Upgraded with FRP Sheets – Part I: Experimental Study", Accepted for publication in the ASCE Journal of Composites for Construction, 2007.
Y.A. Al-Salloum and T.H. Almusallam, ”Creep Effect on the Behavior of Concrete Beams Reinforced with GFRP Bars Subjected to Different Environments,” Construction and Building Materials, Volume 21, Issue 7,July 2007, Pages 1510-1519.
Y.A. Al-Salloum and T.H. Almusallam, ”Seismic Response of Interior RC Beam-Column Joints Upgraded with FRP Sheets - Part I: Experimental Study,” ASCE Journal of Composites for Construction, Volume 11, Issue 6, November/December 2007, pp. 575-589.
Y.A. Al-Salloum, "Compressive Strength Models of FRP-Confined Concrete," Submitted to the Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 December 2007, Hong Kong.
Y.A. Al-Salloum, “Flexural Performance of RC Beams Repaired with Commercial Repair Materials”, Engineering Science, Journal of King Saud University, Volume 19, No. 2, 2007.
Y.A. Al-Salloum, “Influence of edge sharpness on the strength of square concrete columns confined with FRP composite laminates,” Journal of Composites Part B: Engineering, Volume 38, Issues 5-6,July-September 2007, Pages 640-650.
Y.A. Al-Salloum, S. H. Alsayed, T. H. Almusallam and N. A. Siddiqui, "Seismic Rehabilitation of Shear Deficient Exterior Beam-Column Joints Using FRP Composite Sheets," Accepted for Presentation in the 7th Saudi Engineering Conference (SEC7), 26-28 November 2007, Riyadh, Saudi Arabia.
Y.A. Al-Salloum, T.H. Almusallam, S.H. Alsayed, "Behaviour of FRP strengthened masonry walls under out-of-plane seismic loading," Submitted to the Asia-Pacific Conference on FRP in Structures (APFIS 2007), December 2007, Hong Kong.
Transportation Engineering Group
A. Al-Mansour and Al-Mubaraky, M., "Development of Flexible Pavement Distress Model for Riyadh City - Saudi Arabia", Al-Azhar University Engineering Journal Vol.2, No.3, 2007.
A. Al-Mansour and Al-Bishi., F., "Skid Resistance on Riyadh Streets", Seventh Saudi Engineering Conference, King Saud University, Riyadh, 2007.
A.S. Al-Suhaibani, "Effect of Aggregate Source and Gradation on the Resilient Behavior of Bases Aggregate" Accepted for publication in the Journal of Al-Munofiah University, 18 / 12 / 2006 (To be published in Vol.30, No. 2, 2007.
M. Zahw and Mohamed A Azab "The deflection Amplitude under Vehicle Axle Loads Using Elastic Layer System". 9th International Conference, Al Azhar University, Cairo, Egypt, Volume (4), 2007.
Geotechnical Engineering Group
A. A. Al-Karni, "Evaluation of Liquefaction Potential of the Soil of Jazan City in Southwest of Saudi Arabia", International Engineering Congress, Penang, Malaysia, pp. 327-334, 2007.
A. I. Mhaidib, Efficiency of Pile Groups in Clay under Different Loading Rates ", proceedings of the Seventeenth International Offshore and Polar Engineering Conference (ISOPE-2007) , Lisbon, Portugal, Vol. II, 2007.
A. O. Al-Qasabi, Al-Shamrani, M. A. , Refeae, T. O., Al-Mhaidib, A. I., Hamdto, M. "Phases and Methodology in Preparing the Saudi Building Code for Soils and Foundations", 7th Saudi Engineering Conference, King Saud University, College of Engineering, Riyadh, Saudi Arabia, November, 2007.
H. Alawaji, "Performance of Buried Fiberglass Pipes At Elevated Temperatures", Proceedings of the 18th Engineering Mechanics Division Conference of the American Society of Civil Engineers, Blacksburg, VA, USA, June 3 - 6, 2007.
H. Alawaji, "Temperature Effects on Geogrid-Reinforced Sand", Paper to be submitted to Geosynthetics International Journal, 2007.
H. Alawaji, Keynote Paper "Numerical Modeling Of Elastometer2 Tests And Square Footings In Riyadh Limestone", Accepted for the 2nd International Conference On Geotechnical Engineering focusing on New Developments in Geotechnics, Changsha, China, 28-30 November 2007.
M.A. Al-Shamrani, and Al-Qasabi, A. O. “General Overview of The Saudi Building Code for Soils and Foundations,” 7th Saudi Engineering Conference, King Saud University, College of Engineering, Riyadh, Saudi Arabia, December,, 2007.
Shuraim, A. Al-Negheimish, K. Al-Sheref, S Al-sayed, M. Moustafa, Al-Shamrani, M. A. “The Road to Structural codes: the Process and the Criteria Adopted in the Development of Saudi Structural Codes,” 7th Saudi Engineering Conference, King Saud University, College of Engineering, Riyadh, Saudi Arabia, December, 2007.
Water Resource Group
S. Ead, “The Prevention of Vortices and Swirl at Pump Intakes” The 7th Saudi Engineering Conference(SEC7), Riyadh, Saudi Arabia, December 03-05, 2007.
S. Ead, Abdel-Monim Y. K., and Soliman, R. M., “Scour Around Skewed Spur Dikes” 18th Canadian Hydrotechnical Conference, Winnipeg, Manitoba, Canada, August 22 – 24, 2007.
S. Ead, Abdel-Monim Y. K., and El-Mergawey, E. S., “Study of the Characteristics of Drainage Filters” 18th Canadian Hydrotechnical Conference, Winnipeg, Manitoba, Canada, August 22 – 24, 2007.
S. Ead, Alhamid, A., Shabayek, S., and Ghamry, H., “The Use of Physical Modeling to Assist in the Design of Pipe Intake Structures” The V Middle East Regional Conference on Civil Engineering Technology, ASCE, Cairo, Egypt, September. 4-6, 2007.
S. Ead, “Controlling Flows Over an Existing Spillway” The V Middle East Regional Conference on Civil Engineering Technology, ASCE, Cairo, Egypt, September. 4-6, 2007.
Construction Management Group
I.A. Alhammad, Adapting Engineering Curricula in Saudi Arabia: Case Study of Selecting Construction Estimation Textbook, Journal of Civil Engineering, Al Azhar University [Engineering Sciences], ِ2007, Accepted for Publication.
K.S. Al-Gahtani, “Risk Assessment for Scheduling Acceleration” AACE international transaction, Nashville, TN – July 2007.
K.S. Al-Gahtani, and K. A. Taher, “ Analysis of Construction Delay Responsibilities using Expert System” 4th Saudi Engineering Conference, Riyadh, Saudi Arabia, December 2007 (Arabic Language).
K.S. Al-Gahtani, and Mohan, Satish B.; “Total Float Management for Delay Analysis”, Cost Engineering, Vol. 49, No. 02, AACE International, Morgantown, WV, 2007
Surveying
A.M. Al-garni 2007. Experiences with IKONOS and Quick Bird Images in a Mass Production Project. Scientific DIRASAT Journal; The Deanship of Academic Research, University of Jordan; Vol. (34), No. (1), April 2007; ISSN 1560-456 X; p.p. 36-48.
A.M. Al-garni, "Building & Developing the Geographic Information System at King Saud University- Phase II. ESRI Middle East and North Africa User Conference; October 29-31, 2007, Muscat Sultanate of Oman.
A.M. Al-garni, "Predictive Mathematical Emergency Information System (EIS) Using GIS, GPS and Digital Photogrammetry (DP)",ournal of King Saud University. Received 30 January, 2006, accepted for publication 05 February, 2007.
A.M. Al-garni,Comprehensive GIS application to identify traffic risky sites. The Arabian Journal of Geographical Information Sysytem; Vol. (1), No. (2); Saudi Geographical Society; p.p. 1-44, 2007.
I.M. El Hassan, "Comparative study between some spline interpolation techniques". Accepted for publication in Sudan Engineering Society Journal, 2007.
Environmental Engineering Group
A.O. Al-Jasser, Chlorine Decay in Drinking-Water Transmission and Distribution Systems: Pipe Service Age Effect. Water Research v 41 n 2 p 387-396. 2007.